diy aquaponics design
OK...so I realized that raising tomato plants from seed at this point is going to be challenging and I dont really have a resource in the winter for tomato plants, so whats an Aquaponics Gardener to do...Why, build my own DIY EZ Cloner and all for under $50..I say around $40 in the video, but I didnt figure in the cost of the pipe, fittings and the three additional Net Pots w/Neoprene inserts Im going to need, so the total comes in at a little under $50..still not bad considering the price of a commercial unit. Here a few pics of the unit and a video overview of the cloner...I think it is going to work out just fine.
The Finish Product
A Blue 20 Gallon Tote from my local Family Dollar for $10
Fairly deep compared to an 18 Gallon Tote
Layout for 2" holes to accommodate Net Pots
Starting the holes
Standard 2" Net Pots with Neoprene inserts.
Finished the holes for now, still have to purchase 3 more 2" Net Pots w/Inserts
1/2" PVC pipe spray bar before being drilled for spray heads
Spray bar with 360 Degree spray heads installed.
Close up of 360 mist head 11/64 drill bit used for installation
Close up of 360 degree downspray streaming head 11/64 drill bit used for installation
600 GPH pump to be changed out for a 300+ GPH later on.
Assembly installed in Tote
Here is a short video overview of the EZ Cloner in action.
Enjoy!!!
Do you find information about diy aquaponics design are you looking for? If not, below may help you find more information about the diy aquaponics design. Thank you for visiting, have a great day.
